RM-SkyMill3D

High precision and speed CNC milling machine

Precision, rigidity and power at the highest levels. Our high speed CNC milling machine with the best milling performance. RM-SkyMill3D is a CNC milling machine with 3 interpolated axes (optional fourth rotary axis) for mechanical with centesimal precision, perfect for those looking for the best large format milling performance.

View the brochure

Please wait while flipbook is loading. For more related info, FAQs and issues please refer to DearFlip WordPress Flipbook Plugin Help documentation.

RM-SkyMill3D for milling aluminum, brass, copper, steel

It is possible to perform two-dimensional milling by cutting and engraving, and three-dimensional milling to create bas-reliefs and complex geometries.

RM-SkyMill3D is equipped with a powerful 3.3 kW at 24,000 rpm electrospindle, which makes it an ideal CNC milling machine for working metal plates and mechanical components in: aluminum, brass, copper and steel. It can also be used in craft contexts where high precision is required on: wood, plastic, resins, etc.

Processing videos with RM-SkyMill3D

Processing videos with RM-SkyMill3D

RM-SkyMill3D components

  1. Vertical and automatic opening doors
  2. High speed spindle
  3. High speed and precision axes bridge
  4. Automatic tool change with 10 tool stations
  5. On-board console with FANUC CNC interface
  6. Drawers for the containment of processing residues

High speed spindle

RM-SkyMill3D is equipped with a 3.3 kW 24,000 rpm electrospindle for high speed milling. The air cooling system allows perfect heat dissipation and avoids any problem of overheating.

The elastic pliers for the attachment of the cutters allow to accommodate tools up to 20 mm in diameter and guarantee perfect tool balance, considerably reducing any vibration during processing.

Upgraded versions up to 60,000 revolutions per minute and quick release electrospindles for automatic tool change are available.

Rectified worktop with fastening technology

The aluminum worktop is subjected to grinding to ensure maximum flatness of the surface.

The router is equipped with a triple fastening system:

  1. on the base of the working surface there are threaded steel dowels for mechanical fastening by vices or clamps
  2. above the tessellated surface there’s an aluminum suction plane with a vacuum holding system and the possibility of sectioning the suction area
  3. above the suction plane there’s a partitioned aluminum surface with micro air ducts for the retention of the piece at maximum stability

The most complete range of CNC milling machines

RM-SkyMill3D is available in 4 different formats:

  • 1000 x 1000 mm (160 mm Z axis travel)
  • 2000 x 1000 mm (160 mm Z axis travel)
  • 2500 x 1300 mm (160 mm Z axis travel)
  • 3000 x 2000 mm (160 mm Z axis travel)

FANUC HMI for Windows

Another configuration available for RM-SkyMill3D has the FANUC HMI operator interface. Simple and intuitive, for Windows® environment, it allows you to have under control all the commands necessary for piloting RM-SkyMill3D.

CAD/ CAM compatible software

RM-SkyMill3D is compatible with the main CAD/ CAM software. the XMC software interface allows you to import and execute the ISO G-code processing files generated with the main CAM software available on the market.

4.0 Analytics: Data analysis software

4.0 Analytics is the data analysis software for the Ronchini Massimo machines, which allows you to: monitor, store and export RM-MaxiMill3D productivity data.

4.0 Analytics complies with Industry 4.0 standards and allows all Ronchini Massimo CNC machines to communicate with the main business management software, importing the data of: life, production and error generated by the CNC pantograph.

Available optional

Automatic tool change

Automatic tool change with 10 positions automatic rack, complete with 3.6 kW electrospindle at 24,000 rpm and tool setting.

Suction table configuration

Worktop with suction slots for holding workpieces and suction system with vacuum pump 1,8 kW.

Tool presetting

Mechanical probe for automatic measurement of tool length.

Interpolated fourth axis

Continuous and indexed fourth interpolated axis, with sealing system with 4 dependent jaws for cylindrical machining.

Measuring probe

Hexagon® probe for probing and measuring the workpiece, with automatic workpiece setting and measurement functions on the machine.

Camera for reading printing marks

Optical system for cutting centering and cutting profile processing with automatic correction of the printing distortions.

Technical features – RM-SkyMill3D

RM-SkyMill3D 1010

Worktop
・ XY useful working area 1000 x 1000 mm
・ Z axis maximum travel 190 mm
・ Milling surface top in structural aluminum with steel fixing plugs and reference pins
・ Preparation of the top with holding by vacuum
・ Matrix of partialization in rows and columns with mousse cord and suction ports

 

Structure
・ Heavy carpentry frame made up of electrowelded structural steel tubes 12 mm thick
・ Iron and steel stress relieving heat treatment in a furnace to eliminate processing stresses
・ High resistance powder coating in RAL 9016 color
・ High capacity self-leveling adjustable support feet
・ Retractable side drawers for collecting processing residues

 

Axes motion
・ Slides with caged linear ball carriages for heavy loads, with protection from dust thanks to the double front and bottom seals
・ Sliding on ground guides with high load capacity and stiffness with low frictional forces and high efficiency
・ Advancements with high-rigidity ground ball screws with precision class C5 according to DIN 69051 and pitch error of 0.018 mm
・ XY axes maximum speed up to 1000 mm / sec [60.0 m/min]
・ Z axis maximum speed up to 500 mm / sec [30.0 m/min]

 

Supply, weights and dimensions
・ Power supply and absorbed power: 400VAC / 63A
・ Maximum approximate dimensions 1800 x 2300 x 2200 (h) mm (3100 mm height with door open)
・ Indicative and estimated weight 1800 kg

RM-SkyMill3D 2010

Worktop
・ XY useful working area 2000 x 1000 mm
・ Z axis maximum travel 190 mm
・ Milling surface top in structural aluminum with steel fixing plugs and reference pins
・ Preparation of the top with holding by vacuum
・ Matrix of partialization in rows and columns with mousse cord and suction ports

 

Structure
・ Heavy carpentry frame made up of electrowelded structural steel tubes 12 mm thick
・ Iron and steel stress relieving heat treatment in a furnace to eliminate processing stresses
・ High resistance powder coating in RAL 9016 color
・ High capacity self-leveling adjustable support feet
・ Retractable side drawers for collecting processing residues

 

Axes motion
・ Slides with caged linear ball carriages for heavy loads, with protection from dust thanks to the double front and bottom seals
・ Sliding on ground guides with high load capacity and stiffness with low frictional forces and high efficiency
・ Advancements with high-rigidity ground ball screws with precision class C5 according to DIN 69051 and pitch error of 0.018 mm
・ XY axes maximum speed up to 1000 mm / sec [60.0 m/min]
・ Z axis maximum speed up to 500 mm / sec [30.0 m/min]

 

Supply, weights and dimensions
・ Power supply and absorbed power: 400VAC / 63A
・ Maximum approximate dimensions 1800 x 3700 x 2200 (h) mm (3100 mm height with door open)
・ Indicative and estimated weight 3400 kg

RM-SkyMill3D 2513

Worktop
・ XY useful working area 2500 x 1300 mm
・ Z axis maximum travel 190 mm
・ Milling surface top in structural aluminum with steel fixing plugs and reference pins
・ Preparation of the top with holding by vacuum
・ Matrix of partialization in rows and columns with mousse cord and suction ports

 

Structure
・ Heavy carpentry frame made up of electrowelded structural steel tubes 12 mm thick
・ Iron and steel stress relieving heat treatment in a furnace to eliminate processing stresses
・ High resistance powder coating in RAL 9016 color
・ High capacity self-leveling adjustable support feet
・ Retractable side drawers for collecting processing residues

 

Axes motion
・ Slides with caged linear ball carriages for heavy loads, with protection from dust thanks to the double front and bottom seals
・ Sliding on ground guides with high load capacity and stiffness with low frictional forces and high efficiency
・ Advancements with high-rigidity ground ball screws with precision class C5 according to DIN 69051 and pitch error of 0.018 mm
・ XY axes maximum speed up to 1000 mm / sec [60.0 m/min]
・ Z axis maximum speed up to 500 mm / sec [30.0 m/min]

 

Supply, weights and dimensions
・ Power supply and absorbed power: 400VAC / 63A
・ Maximum approximate dimensions 2100 x 4200 x 2200 (h) mm (3100 mm height with door open)
・ Indicative and estimated weight 4400 kg

RM-SkyMill3D 3020

Worktop
・ XY useful working area 3000 x 2000 mm
・ Z axis maximum travel 190 mm
・ Milling surface top in structural aluminum with steel fixing plugs and reference pins
・ Preparation of the top with holding by vacuum
・ Matrix of partialization in rows and columns with mousse cord and suction ports

 

Structure
・ Heavy carpentry frame made up of electrowelded structural steel tubes 12 mm thick
・ Iron and steel stress relieving heat treatment in a furnace to eliminate processing stresses
・ High resistance powder coating in RAL 9016 color
・ High capacity self-leveling adjustable support feet
・ Retractable side drawers for collecting processing residues

 

Axes motion
・ Slides with caged linear ball carriages for heavy loads, with protection from dust thanks to the double front and bottom seals
・ Sliding on ground guides with high load capacity and stiffness with low frictional forces and high efficiency
・ Advancements with high-rigidity ground ball screws with precision class C5 according to DIN 69051 and pitch error of 0.018 mm
・ XY axes maximum speed up to 1000 mm / sec [60.0 m/min]
・ Z axis maximum speed up to 500 mm / sec [30.0 m/min]

 

Supply, weights and dimensions
・ Power supply and absorbed power: 400VAC / 63A
・ Maximum approximate dimensions 3000 x 4700 x 2200 (h) mm (3100 mm height with door open)
・ Indicative and estimated weight 5400 kg